Slicer Discord
"Glowing" - Annabelle – 3D printable model from MakerWorld MakerWorld
2D Art

"Glowing" - Annabelle

76 Downloads
40 Likes
50 Makes
Go to Model
Plate 1 is set up for printing with AMSPlate 2 has included pauses at the correct layer heights to swap colors manually. (Follow instructions below). Optimized for 3D printing with a amazing depth of field. Currently available in 150x150mmFor other dimensions. Upscale X and Y axis to desired dimensions and keep Z on the same height. *Pictures can be printed with out AMS by following the print instructions below.* Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:PLA BambuLab Basic BlackPLA BambuLab Glow Green Swap Instructions:Start with BlackAt layer #10 (0.64mm) swap to PLA BambuLab Glow Green
Category
2D Art
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Medium confidence
Why?
2 colors
Single piece 2 colors / AMS
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA
Min. bed size
150 mm (Medium)
Colors
2 (AMS/MMU recommended)
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection