"Glowing" - Fox

Optimized for 3D printing with a amazing depth of field. The Glowing series is optimized for use with glow in the dark filaments for a mesmerizing effect.Charge the pictures with UV light for the most optimal effect.There will be 2 print profiles available.200x200 is optimized for x1c, p1s, p1p150x150 is optimized for A1 mini. Frames for both sizes can be found in my uploaded models. Pictures can be printed with out AMS by following the print instructions below. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:Bambu Lab PLA Matte CharcoalBambu Lab PLA Glow PinkBambu Lab PLA Glow OrangeBambu Lab PLA Glow GreenBambu Lab PLA Glow BlueBambu Lab PLA Glow YellowSwap Instructions:Start with BlackAt layer #7 (0.64mm) swap to Bambu Lab PLA Glow PinkAt layer #8 (0.72mm) swap to Bambu Lab PLA Glow OrangeAt layer #17 (1.44mm) swap to Bambu Lab PLA Glow GreenAt layer #21 (1.76mm) swap to Bambu Lab PLA Glow BlueAt layer #23 (1.92mm) swap to Bambu Lab PLA G