"Glowing" - Scarecrow

The Glowing series is optimized with 2 filaments for the most popping effect when matched with glow in the dark filament. It can be printed with either glow in the dark filament or with plain bambu lab green filament (without the glow in the dark effect). There are 2 print profiles available.200x200 is optimized for x1c, p1s, p1p150x150 is optimized for A1 mini. Check out my frame options in the links belowhttps://makerworld.com/en/models/49964#profileId-51734https://makerworld.com/en/models/40145#profileId-39785 Pictures can be printed with out AMS by following the print instructions below. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:PLA BambuLab Matte Charcoal Transmission Distance: 3.8PLA BambuLab Basic BambuLab Green Transmission Distance: 20Swap Instructions:Start with CharcoalAt layer #10 (0.72mm) swap to BambuLab Green for the rest. Art generated by midjourney and optimized for printing with Hueforge Boost MeFeel free to contact m