"Glowing" - The Grinch

Optimized for 3D printing with a amazing depth of field. The Glowing series is optimized with 2 filaments for the most popping effect when matched with glow in the dark filament. It can be printed with either glow in the dark filament or with plain bambu lab green filament (without the glow in the dark effect).. There are 2 print profiles available.200x200 is optimized for x1c, p1s, p1p150x150 is optimized for A1 mini. Pictures can be printed with out AMS by following the print instructions below. Art generated with midjourney and optimized for 3D printing with Hueforge. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used:PLA BambuLab Matte Charcoal Transmission Distance: 5.4PLA BambuLab Basic BambuLab Green Transmission Distance: 12Swap Instructions:Start with CharcoalAt layer #11 (0.96mm) swap to BambuLab Green for the rest. Boost MeFeel free to contact me if you want other designs or changes on the model.Please feel free to leave comments an