Gnat-Stats desktop case

I wanted to create a Gnat-Stats monitor but wasn't happy with the lack of case options so I modified an existing item to fit my needs. This is designed for a 0.96" OLED and a generic Arduino Pro Micro.

EDIT:
I've added a pair of magnetic "feet" that slip onto the bottom of the case. These are a bit snug, and will likely need to be removed with pliers, but are technically removable. The magnets are 5mm x 1mm (https://www.amazon.com/gp/product/B07C5HXR2X) and are press-fit. I was able to get them in by using a 1/4" punch with a jeweler's hammer, on a hard flat surface. The feet do need support. Print them flat and use "normal" and "everywhere" settings. If you use default Cura options, it's easy to remove them by using a small precision flathead (I used a 1.6 mm) between the foot and the support. Just push and rock, and the support should pop right out as you go.

Notes:

The display doesn't align with the existing stand-offs but they will still space it at the correct di