Thingiverse
Godox V860 II / TT685 Diffuser Kit
41
Download
33
Likes
0
Makes
This slides snuggly onto a godox V860 II / TT685 speedlight
No need for supports in printing the main body (diffuser holder)
The panel with pins holds nicely into the holes.
You can also print the diffuser panel without the pins and use the filter holder to keep it in place.
I did cut out some gels to sandwich between the filter holder and the diffusion panel.
DOME: I suggest printing it with tree support with support overhang angle of 60 and use translucent filament as many layers overlap each other.
DIFFUSER PLATE: Only 2 layers a 0.28, I print the first layer in white then switch to a transparent filament for the rest so that not too much light is lost.
You can store your accessories using the filter holder and place your various gels / diffusion plate / and dome and locking it in place with the locking ring.
No need for supports in printing the main body (diffuser holder)
The panel with pins holds nicely into the holes.
You can also print the diffuser panel without the pins and use the filter holder to keep it in place.
I did cut out some gels to sandwich between the filter holder and the diffusion panel.
DOME: I suggest printing it with tree support with support overhang angle of 60 and use translucent filament as many layers overlap each other.
DIFFUSER PLATE: Only 2 layers a 0.28, I print the first layer in white then switch to a transparent filament for the rest so that not too much light is lost.
You can store your accessories using the filter holder and place your various gels / diffusion plate / and dome and locking it in place with the locking ring.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
