Godzilla Hueforge

Project: godzilla 2.hfpPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.64mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.4mm #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #3c933f PLA Overture Green Transmission Distance: 1.1 #de1619 PLA PolyTerra Lava Red Transmission Distance: 1 #e5c8a2 PLA PolyLite Cream Transmission Distance: 2 #e6dede PLA Overture Matte White Transmission Distance: 3.7This print uses 6 unique filamentsSwap Instructions: Start with Charcoal At layer #18 (0.84mm) swap to Blue Gray At layer #22 (1mm) swap to Green At layer #23 (1.04mm) swap to Lava Red At layer #25 (1.12mm) swap to Cream At layer #30 (1.32mm) swap to White for the rest.