GoFoil tail adapters

Here are some GoFoil tail adapters to use Axis, Armstrong, UniFoil tails on your gofoil setup.

I found i needed to use quite chunky tails from these brands to match the GoFoil front foils.

You'll need a longer screws (front one perhaps works) and a nut to hold the tail in place. Front screw goes direct into the mast, back screw into a nut. The Armstrong tails are a bit trickier to get going because their tails come with the thread attached - you need a bolt with a thread missing from the lower half. Aliexpress has these and i found M6 x 25mm worked well, item called 'Round Head Hexagon Socket Screw with Waisted Shank 304 Stainless Steel Button Head Allen Unloosing Bolt' so try something along those lines. Take care not to cross thread your mast and bolt!

Armstrong 232 worked well with RS1075X. I didn't have much success at high speed with anything UniFoil or Axis (progressive and skinny). Let me know if you have any great successes!!!!

The FTL extender is somewhat work in progres