goku hueforge

Project: Goku 2.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm The Model is 224.34x329.63mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.8mm and the Actual Thickness is 2.56mm #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #0056b8 PLA BambuLab Basic Cobalt Blue Transmission Distance: 1.2 #56b7e6 PLA BambuLab Matte Sky Blue Transmission Distance: 1.3 #000000 PLA BambuLab Basic Black Transmission Distance: 0.5 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 7 unique filaments Swap Instructions: Start with BambuLab Matte Charcoal At layer #8 (0.8mm) swap to BambuLab Basic Cobalt Blue At layer #12 (1.12mm) swap to BambuLab Matte Sky Blue At layer #14 (1.28mm) swap to BambuLab Basic Black At layer #16 (1.44mm) swap to BambuLab Bas