goku hueforge

Project: goku 4 goldv2.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 132.71x218.54mm in sizeYou may print at higher layer heights below the Min Depth of 0.56mmThe Max Depth is 2.2mm and the Actual Depth is 2.1mmFilaments Used: PLA+ ESUN Black Transmission Distance: 0.3 PLA+ ESUN Red Transmission Distance: 4 PLA+ Esun Orange Transmission Distance: 5 PLA+ ESUN ESUN Transmission Distance: 5.2This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #11 (0.96mm) swap to Red At layer #14 (1.2mm) swap to Orange At layer #16 (1.36mm) swap to WHITE for the rest.