Goku Hueforge

A Hueforge Goku from a picture i found on internet. Credits for designer. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 137.86x245mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA BambuLab Matte Latte Brown Transmission Distance: 2PLA BambuLab Basic Red Transmission Distance: 4This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #10 (0.88mm) swap to Blue GrayAt layer #12 (1.04mm) swap to Latte BrownAt layer #17 (1.44mm) swap to Red for the rest.