Goku

Project: Goku Color Aware.hfpPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 240x169.63mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.5mm and the Actual Depth is 2.4mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA Kexcelled Sky Blue Transmission Distance: 2.6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Orange Transmission Distance: 5This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #11 (0.56mm) swap to Blue At layer #14 (0.68mm) swap to Sky Blue At layer #25 (1.12mm) swap to Jade White At layer #26 (1.16mm) swap to Black At layer #30 (1.32mm) swap to Red At layer #33 (1.44mm) swap to Yellow At layer #35 (1.52mm) swap to Orange At layer #36 (1.56mm) swap to Jade White