GokuHueAllPrints

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x210mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2mm and the Actual Depth is 2mmFilaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 4 unique filaments!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Jade White At layer #13 (1.12mm) swap to Black At layer #14 (1.2mm) swap to Scarlet Red At layer #19 (1.6mm) swap to Yellow At layer #23 (1.92mm) swap to Jade White for the rest.