Golden Cat HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 112.66x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 3mm and the Actual Depth is 3.1mm Filaments Used:     PLA Generic White Transmission Distance: 5     PLA Generic Black Transmission Distance: 0.3     PLA Generic White Transmission Distance: 5     PLA Geeetech Gold Transmission Distance: 3     PLA Generic White Transmission Distance: 5 This print uses 3 unique filaments Swap Instructions:     Start with Jade White     At layer #3 (0.32mm) swap to Black     At layer #10 (0.88mm) swap to White     At layer #13 (1.12mm) swap to Black     At layer #18 (1.52mm) swap to White     At layer #22 (1.84mm) swap to Gold     At layer #24 (2mm) swap to Gold     At layer #30 (2.48mm) swap to White for the rest.