Free Game Props STL Download - GOLDEN DRAGONby Sirprintzalot

“This fierce articulated dragon was born from fire and filament 🔥 Fully poseable, 3D printed, and ready to guard your shelf or gaming setup.”🔧Optimal Print Settings (Creality K1 Max – PLA)Layer Height (Quality)0.12 mm – best balance of detail and print timeGo to 0.08 mm if you want ultra-fine details (but it will take much longer)Wall SettingsWall Line Count: 3Wall Thickness: 1.2 mmThis improves definition in claws, horns, and wings.Top/Bottom LayersTop Layers: 6Bottom Layers: 5Infill10% – 15% Gyroid or Cubic — strong enough and fastSupports✅ Yes — Required for wings, tail, and claw overhangsType: Tree Supports (preferred for detailed models)Overhang Angle: 45°Z Distance: 0.2 mmSupport Density: 10–15%Print Speed50–60 mm/s – slow for smooth curves and scalesOuter Wall Speed: 30 mm/s for clean surface qualityCoolingFan Speed: 100% after layer 3Enable gradual fan ramp-up if your slicer supports itBuild Plate AdhesionUse a brim (8–10 lines) to keep claws and tail anchoredTemperatures (PLA)Nozzle: 200–205°CBed: 60°CRetraction (Direct Drive)Distance: 0.8–1.2 mmSpeed: 30 mm/s🧼 Optional Post-ProcessingLight sanding on flat areasPrime and paint to highlight the scales and facial details⏱️ Estimated Time & FilamentTime: Around 18–24 hours depending on size and layer heightFilament: ~100–150g (depending on size and infill)