Golden rainbow trout

This is an assembled model of a golden rainbow trout, created in Gravity Sketch and Blender. The model dimensions are approximately 275mm x 66.5mm x 96mm, with the main color being lemon yellow. The head and body require minimal tree supports, and it is recommended to use Bambu cool plate. The thickness of the Boolean cutter is 0.1mm, ensuring that the assembled parts do not easily come apart. Glue can be used to secure the connections firmly. It is not recommended to scale down the model as this could cause the ends of the fin rays to fail. Installation from the pupil to the iris might be challenging. You can use small pliers to clamp the bottom of the black pupil, forming a sharp angle at the bottom, and then press it into the orange iris. An integrated STL file is provided. 这是一个拼装的金色虹鳟鱼模型，在Gravity sketch和Blender中创建。模型尺寸约为275*66.5*96mm，主体颜色为柠檬黄。头部和身体需要少量树状支撑，建议使用PLA低温打印板。 布尔切刀的厚度为0.1mm，拼装后不易脱落，可以使用胶水确保连接处牢固。不建议缩小模型，这会导致鱼鳍的辐条末端失效。 从瞳孔到虹膜可能不太好安装，可以先用小工具钳夹一下黑色瞳孔的底端，使底端形成一个锐角，再用力压进橙色虹膜内。