Golf Pro Quest 2 mod

This mod holds the quest 2 controller secure at the end of a cut down club. Adjustable weight improves swing realism.

What you need:
Donor club with stepped shaft 12.5mm (1/2") at the cut end. A tapered shaft will work but will require more effort to secure.
Tools to cut and drill the club shaft
glue
2" bolt 1/4 20 thread
2" cap screw partial thread 1/4 20
1/4 20 nyloc nuts X 2
1/4 20 regular nuts X 2
a stack of large washers



Print .4 nozzle @.28 layer height . 40 walls. No top/bottom layers , infill, or supports.

mirror the mount and quick release in the slicer for a left handed version




Assembly:

The hole through the shaft needs to be accurate. Drill out the threads on 2 regular nuts and glue them into the drill guide.

Glue the cap onto the mount. 2 part epoxy is a good choice.

Bolt the assembly together [draw the rest of the owl…]

A tapered shaft will need to be shimmed or glued





Remove the battery cover and slide the contro