Google Nest Mini Mount

This remix was necessary for two reasons. The original power outlet hole for the Google Home Mini Mount by Yelt had did not fit the Nest Mini that I received. Also, if oriented in an upright position, it tended to lean to the left or right if knocked a bit.

I used one of the cable clips to plug up the hole below the speaker ring to make the hole ever-so-slightly less noticeable.

Great design otherwise!

**UPDATED 3/6/2020**

Added 'Thinner' version. The backing plate on the outlet was a bit too thick. Wife complained it would fall out so I made it thinner at about .75mm. Stays in the wall better. Would suggest printing that one.