Thingiverse
Google Pixelbuds Tile Sticker Tracking Case
von darkvoxels
5
Downloads
8
Likes
0
Makes
Created a case to fit google pixel earbuds that encases a tile sticker so that you can track and locate your earbuds if you lose them.
Printing:
STL file should be the recommended orientation for printing. recommend printing it with the largest opening touching the build plate to reduce surface artifacts from supports.
Layer Height: not very important had success with 0.2 and 0.3
Supports: Touching Build Plate was sufficient
Infill: 20%
Printing:
STL file should be the recommended orientation for printing. recommend printing it with the largest opening touching the build plate to reduce surface artifacts from supports.
Layer Height: not very important had success with 0.2 and 0.3
Supports: Touching Build Plate was sufficient
Infill: 20%
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!