Gooseneck Lamp

This gooseneck lamp uses a series of ball and socket links to form a flexible, infinitely positionable lamp. Make it as long or as short as you like by adding more or fewer ball and socket links. It is designed for standard sized E-26 bulbs and has a shade that clips right onto the plastic bulb dome. The ball end of each link has a print-in-place clamping nut that can be used to adjust the joint friction or to lock the joints in place. To complete the lamp, you will need the following items:- Ceramic lamp socket- Lamp Cord (18 ga or lighter)- ¼-20 x 3.5" threaded rod- ¼-20 nut CAUTION: Use only with LED bulbs (not incandescent) 60w equivalent or less. AssemblyAfter printing, remove the brims from the ball and nut pieces.Thread the threaded rod into the hole in the lamp base. Tapping the hole with a ¼-20 tap can make this a little easier, but otherwise you should be able to just force it in.Start threading your lamp cord up through the base. Continue threading the cord up through ea