Goosky s2 xt30 holder

Update to design with retainers. The xt30 kept pulling out so I have changed the design on the retainers.
The files included now are : print 1+3 or 2+3
1. S2_XT30_Holder_Top_standard
2. Use this file for the connector to stick out by by extra 2mm S2_XT30_Holder_Top_2mm sticking out paired with holder base 2mm thicker

3. XT30_Holder_Base (print 2mm thicker with z scale if using number 2. This will give 2mm thicker base if problems with warping.

use an allen key slightly bigger than the slot to pry it apart slightly, this will help when clicking in the xt30

(This is a small mod to a xt30 holder designed by helicopterguru for the goosky s2.

You just have to push the xt30 in with a bit of force, It clicks in lovely. but once in will not pull out so no glue required. You can remove the connector again by spreading the slot slightly with a screw driver or a 4mm allen key on its side which worked for me.

For the screw use a small self tapper number 2 size and 6.5mm long

Print in hi