GoPro Scuba Tray

This is a total re-work of my original design. You will notice fewer screw holes if you looked at the original ( that one is pulled down). Its meant to be either printed as a single piece laying on its back, or epoxied together. There are two screw holes in the tops plates and the tops of the handles. They are there to help you align the top and get it on straight. Using all screws is just too loose. The frame tweaks too easily if you use just screws.

You will notice a lack of mounting points for your gopro. That is intentional. I do not like printed mounting points. They can break, They dont always print accuratly, and they are just a pain to draw. This tray system uses Gopro stick on mounting points. They use 3M adhesive pads that just dont let go. If you are concerned. you can tether the camera to the tray if you like.

You have several options here: You can print a complete tray designed to hold either 1 or 2 lights on the top plate, or you can print a single base separate