Gorilla Hueforge 200x200

Project: gorilla.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA smartfil marron Transmission Distance: 5 PLA smatfil White Transmission Distance: 6 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to marron At layer #12 (1.04mm) swap to White for the rest.