MakerWorld
Hueforge & Lithophane
Zum Modell
Gorillaz (hueforge)
59
Downloads
39
Likes
3
Makes
Project: gorillaz final.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmThe Model is 188.24x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Yellow Transmission Distance: 3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Matte Charcoal Transmission Distance: 0.3This print uses 3 unique filamentsSwap Instructions: Start with Yellow At layer #7 (0.72mm) swap to Red At layer #20 (1.76mm) swap to Charcoal for the rest. You can easily switch the first color to white if you prefer the original look from the image. Be aware though, the red shadows will still be there.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!