GoSund Smart Switch Flash Tool

Gosund Smart Light Switch Flash Tool

https://www.gosund.store/products/smart-switch-ks602s-1-pack

These are designed to be used with push pins here: https://www.amazon.com/gp/product/B07FPFBFV3/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Along with standard Dupont connectors.


Install:

When printing, you'll notice with a 4mm nozzle, the STL will leave a gap on the perimeter, this is intentional to allow you to solder the Dupont connector to the push pins

I put the 6 pins in place, and removed the plastic case from the male side of the Dupont connectors and place them into the gaps and solder in place.

It's not perfect, but it works and gets the job done.