Slicer Discord
Gothic Bracelet & Rings – 3D printable model from MakerOnline MakerOnline
Gothic Bracelet & Rings – Bild 1 Gothic Bracelet & Rings – Bild 2 Gothic Bracelet & Rings – Bild 3 Gothic Bracelet & Rings – Bild 4 Gothic Bracelet & Rings – Bild 5 Gothic Bracelet & Rings – Bild 6
Fashion

Gothic Bracelet & Rings

57 Downloads
27 Likes
0 Makes
Go to Model
A set of Gothic jewelry Size selection help RING SIZE CHART EU | US  | Diameter | Circumference ------------------------------------- 44 | 3  | 14.0 mm | 44 mm 45 | 3.25 | 14.3 mm | 45 mm 46 | 3.75 | 14.6 mm | 46 mm 47 | 4  | 15.0 mm | 47 mm 48 | 4.5 | 15.3 mm | 48 mm 49 | 4.75 | 15.6 mm | 49 mm 50 | 5  | 15.9 mm | 50 mm 51 | 5.5 | 16.2 mm | 51 mm 52 | 6  | 16.5 mm | 52 mm 53 | 6.25 | 16.9 mm | 53 mm 54 | 6.75 | 17.2 mm | 54 mm 55 | 7  | 17.5 mm | 55 mm 56 | 7.5 | 17.8 mm | 56 mm 57 | 8  | 18.1 mm | 57 mm 58 | 8.25 | 18.5 mm | 58 mm 59 | 8.75 | 18.8 mm | 59 mm 60 | 9  | 19.1 mm | 60 mm 61 | 9.5 | 19.4 mm | 61 mm 62 | 10  | 19.7 mm | 62 mm 63 |10.25| 20.0 mm | 63 mm 64 10.75| 20.4 mm | 64 mm 65 | 11  | 20.7 mm | 65 mm How to Measure Your Ring Size Correctly Method 1: Using a paper strip Cut a thin strip of paper. Wrap it around the base of your finger. Mark where the ends meet. Measure the length in millimeters. Compare with the circumference column. Method 2: Using an existing ring Measure the inside diameter of a ring that fits well. Match the number with the diameter column in the chart. - BRACELET SIZE CHART Type    | Wrist (cm) | Bracelet Length (cm) ----------------------------------------------- Kids XS   | 11–12   | 13–14 Kids S   | 12–13   | 14–15 Women XS  | 13–14   | 15–16 Women S   | 14–15   | 16–17 Women M   | 15–16   | 17–18 Women L   | 16–17   | 18–19 Men S    | 16–17   | 18–19 Men M    | 17–18   | 19–20 Men L    | 18–19   | 20–21 Men XL   | 19–20   | 21–22 How to measure correctly Wrap a paper strip, ribbon, or measuring tape around your wrist. Record the exact wrist circumference. Add extra length depending on fit: Snug fit: +1 cm Regular fit: +1.5 cm Loose fit: +2 cm
Category
Fashion
Source
MakerOnline
Published
Updated
What you need to print this: Beginner Low confidence
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
Min. bed size
50 mm (Small)
Software
Cura, PrusaSlicer, or similar
Same designer, more platforms

Dalren Kaldulren also publishes on

578 additional models across 2 more platforms

Verified by matching model titles across platforms.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection