GPD Win Bottom Shell Housing (Large Battery)

User Pintek over at Dingoonity shared this Design. Since there are Batteries out there that are Bigger in Size than the GPD Battery, this could come in handy. Not to mention a few more Vents. Also can use a Larger Fan. Might be a little too big for some, but will ask if he can reduce the Size for those sticking with the normal Fan and will only need to make sure there is no contact to the Board. But if this Design is for you, here you go. Looks like it could be Adjusted to place the L/R 2 Buttons in a better placement though. Would require Soldering.
From his Post:
53mm deep
135mm wide
12.7mm tall before interfering with the stock fan otherwise if keeping a battery 112mm wide you can go 18mm high if the speaker is removed