Thingiverse
GPS Bicycle Computer w/ ESP32, Speedometer, SD Logging
by Wi_Zeus
47
Downloads
45
Likes
0
Makes
I MOVED TO PRUSAPRINTERS.ORG, PLEASE VISIT MY PROFILE THERE AND DOWNLOAD THERE! THANKS!
https://www.prusaprinters.org/social/229741-wizeus/about
# ESP32 (Arduino) Based Bicycle Computer with GPS and SD logging
This is still work in progress but mostly functional this far.
The code and mechanical aspects of the project definitely work well enough for a daily usage scenario.
_Documentation isn’t available yet, I’d recommend anyone to start this project who already has a decent understanding of electronics.
See the code for pin-definitions and / refer to the schematic in the pcb folder on GitHub_
Quick overview:
- GPS Speedometer and other data such as altitude, traveled distance and time
- 128x64 LCD
- RTC DS3231
- Temperature and Humidity Sensor HTU21D
- LDR for backlight adjustment
- Micro SD for logging your trips
- Charging over Qi Wireless charging
- One user-button
- 2x 14500 LiFePO4 Battery
Print the necessary files and build the circuit.
Initially
https://www.prusaprinters.org/social/229741-wizeus/about
# ESP32 (Arduino) Based Bicycle Computer with GPS and SD logging
This is still work in progress but mostly functional this far.
The code and mechanical aspects of the project definitely work well enough for a daily usage scenario.
_Documentation isn’t available yet, I’d recommend anyone to start this project who already has a decent understanding of electronics.
See the code for pin-definitions and / refer to the schematic in the pcb folder on GitHub_
Quick overview:
- GPS Speedometer and other data such as altitude, traveled distance and time
- 128x64 LCD
- RTC DS3231
- Temperature and Humidity Sensor HTU21D
- LDR for backlight adjustment
- Micro SD for logging your trips
- Charging over Qi Wireless charging
- One user-button
- 2x 14500 LiFePO4 Battery
Print the necessary files and build the circuit.
Initially
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
