Slicer Discord
GPS Module Enclosure with Window Mount – 3D-Druckmodell von Thingiverse Thingiverse

GPS Module Enclosure with Window Mount

von DamianB2
1 Downloads
2 Likes
0 Makes
Zum Modell
This is a small enclosure for a GPS Module and antenna. It has a suction cup to stick it to a window for good reception. The enclosure was designed to fit this module and antenna:
https://www.amazon.com/gp/product/B084MK8BS2/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
but may work for other GPS modules and antennas.
UPDATE: The above link has been changed. Use the following: https://www.amazon.com/Microcontroller-Compatible-Sensitivity-Navigation-Positioning/dp/B07P8YMVNT/ref=sr_1_3?keywords=gps+module+receiver+25mm&qid=1639250733&sr=8-3

The suction cup is a 30 mm base from this:
https://www.amazon.com/gp/product/B073S5TX8W/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

The cable holder is a PG7 found here:
https://www.amazon.com/gp/product/B07GJDYGP5/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

All the screws (5) are M3x6 mm.

I added a dab of hot glue to the antenna to hold it in its pocket in the lid.

It might be interesting to print it in clear fila
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Warum?
aufwändige Nachbearbeitung
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 2/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Nachbearbeitung
Kleben, Hardware
Software
Cura, PrusaSlicer o. Ä.
Gleicher Designer, mehr Plattformen

DamianB2 veröffentlicht auch auf

168 zusätzliche Modelle auf 2 weiteren Plattformen

Verifiziert durch übereinstimmende Modelltitel über Plattformen hinweg.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen