GPU Stabalizer

It is a screwed GPU stabilizer, which is countered with a nut.There are two different sizes: large (dimensions: min: 85mm; max: 140mm) and small (dimensions: min: 55mm; max: 79mm).For a perfect fit, you need to scale the pod and the nut up by 3% in the x and y directions and down by 3% for the screw.The nut is universal and can be used for both versions.I would recommend printing it in PETG or ABS because of the high temperatures inside your case. But PLA works fine for me. Recommendations:Material: PETG or ABSPrinting: Brim for the large screw and podTemperature: Extruder: 215°CBed: 60°C