MakerWorld
Gadgets
Zum Modell
GPU Support 3 Designs + Magnet + Customizable
100
Downloads
26
Likes
29
Makes
Heyhooo Here I have my design of a GPU Support 4 you :) The Support (unscaled) can get around +20 mm height if you unscrew it. 3 Designs!I have Design A, B and C for you. Furthermore you can customize the colors with multicolor printing if required.Design A:Design B:Design C:Magnet Inside!You can add a Magnet to the holder so it stays in place even if you throw the PC around! I designed it to have a cavity for a magnet with ≤ 10 mm diameter and ≥10 mm height. But if you unscrew the top part the magnet can be higher of course. Also keep in mind: If you rescale the model - The magnet could need other dimensions too! All Sizes: Scaling!Since you need no hardware you can scale the design to your requirements! Simply use your slicer to do that! Only make sure that you always scale X and Y directions the same amount. </figu
Meister Edel veröffentlicht auch auf
226 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
