GPU Support Mount Streacom DA6

This is an adapter to secure a gpu with threaded screw holes at the back to the accessory rails in the Streacom DA6 and DA6 XL. Before you make any adjustments, please print the default config first!Additional hardware is required! The mount is intended to be used with the DA6 accessory rails on the inward configuration. The model is configurable in (also see documentation): gpu screw mount spacing (distance between two screw mounting points on your gpu) gpu screw mount adjustment range (default 20mm, as the adjustment range of the gpu inside the DA6 is also 20mm, only change if necessary) case mount radius length (min. 20mm, increase if your da6 accessories mount bars are further than 20mm away from the gpu screw mount, the adjustability is infinite inside the radius as the part can freely rotate) Additional hardware required:3x M3x12 Countersunk Screw2x M3x5,7 Threaded Inserts I printed the mount in PETG-CF and have no issues, but your mileage may vary. Best printed in ABS/ASA or any