Graffiti Master Chief Hueforge

Please leave a rating, comment or boost if you like the print! Want to sell my prints? Commercial License now available here: https://patreon.com/3ReePrinting Another follower request. What I like about this one is you can easily swap the colors and it seems to always look good. I'm a big Red Vs. Blue fan and swapped green for Turquoise so now I have a Church hueforge! This print is the maximum build plate size for an A1 Mini, but it should work on any printer! If you resize the model make sure you do NOT scale the Z axis or the print colors will not be in the same positionPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 170x170mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA Bamb