Graffiti Verso Hueforge

Please leave a rating or comment if you like the print! Want to sell my prints? Commercial License now available here: https://patreon.com/3ReePrintingMembershipCommercial License also available here! Check out the rest of my Hero/Villain series here: https://makerworld.com/@3ReePrinting/collections/3340968 Let me know if you want more Expedition 33 content! This print is the maximum build plate size for an A1 Mini, but it should work on any printer. Boost MeThank you for the support! If you resize the model make sure you do NOT scale the Z axis or the print colors will not be in the same position Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 170x170mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mmFilaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #ffffff PLA B