Thingiverse
Grail Vase
di JobSmolders
20
Download
18
Likes
0
Makes
This Vase or Lamp Shade was meant to print using the “spiral outer contour mode” in Cura.
But that didn’t work due to deformation and the print didn’t come out the way I wanted it to. I tried different materials and different printers, but this one is just no meant for a “one layer wall” :-) .
So these Vases where printed as normal ( as a solid), but with 0% infill, 2 wall layers (wall count =2) , 1 bottom layer, and 0 top layers. Also I changed Z seam to “closest” to avoid travel moves that are unnecessary (and thus avoid stringing).
The translucent Lamps Shade one is PET-G, the green one is PLA
But that didn’t work due to deformation and the print didn’t come out the way I wanted it to. I tried different materials and different printers, but this one is just no meant for a “one layer wall” :-) .
So these Vases where printed as normal ( as a solid), but with 0% infill, 2 wall layers (wall count =2) , 1 bottom layer, and 0 top layers. Also I changed Z seam to “closest” to avoid travel moves that are unnecessary (and thus avoid stringing).
The translucent Lamps Shade one is PET-G, the green one is PLA
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
![[Gridfinity] Base for magnetic Label / Sticker Dispenser Rail](/imgproxy.php?url=https%3A%2F%2Fresize.thingiverse.com%2F%3Furl%3Dhttps%3A%2F%2Fcdn.thingiverse.com%2Fassets%2F79%2Fa4%2F16%2F44%2Fad%2FGridfinity_Base_2x3-_magnetic_Label_Sticker_Dispenser.png%26w%3D1024%26h%3D1024%26fit%3Dcontain%26cbg%3Dwhite&w=400&h=300)