Thingiverse
graphic card holder
by gauth_67
1
Downloads
3
Likes
0
Makes
Graphics card holder with height system.
Use the desired size with "Base ....mm to ....mm.STL" and use the "Cache.STL" to fill the gap.
The supprot can go from 48mm to 114mm high with 2mm step.
Ex: 48 ; 50 ; 52 ; 54 ; ......
For the "cache", the 3D model is 100mm height.
Once the support and the base printed and the length selected, measure the spacing between the 2 parts and on ultimaker made Z = spacing - 100
Made with a WANHAO duplicator 12.
Use the desired size with "Base ....mm to ....mm.STL" and use the "Cache.STL" to fill the gap.
The supprot can go from 48mm to 114mm high with 2mm step.
Ex: 48 ; 50 ; 52 ; 54 ; ......
For the "cache", the 3D model is 100mm height.
Once the support and the base printed and the length selected, measure the spacing between the 2 parts and on ultimaker made Z = spacing - 100
Made with a WANHAO duplicator 12.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!