Gravity Knife Improved Version

This is my take on EDC Gravity Knife by Maker209. This not fully 3d printed. you will need some extra hardware. The aim of this remix is to prevent the knife from slipping from your hand and to prevent it from easily opening in your pocket. Needed hardware; 2x magnet 6x1 or 6x1,5mm 2x heat insert M3x5x4 (Voron standart) 2x screw M3x5mm Here are the improvements I've made: -Notches were added to the upper body for better grip.I also tried to achieve a modern look by adding small holes to the side. A 6mm wide hole was added to the upper body. A magnet needs to be added here. Magnet must be press fitted. You can use a drop of superglue. Please pay attention to the direction of the magnet. -Finger guard were added to the upper part of the main body. A 6mm wide hole was also drilled, where a suitable magnet needs to be inserted. Magnet must be press fitted. You can use a drop of superglue. Please pay attention to the direction of the magnet. Main body needs to be print with supports. -I add