gray wood

Project: masra.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmThe Model is 160x90mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.5mmFilaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Silver Transmission Distance: 2 PLA+ Sunlu White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #6 (0.64mm) swap to Silver At layer #10 (0.96mm) swap to White for the rest.