MakerWorld
Hueforge & Lithophane
Ver Modelo
Green Arrow Hueforge
16
Descargas
19
Likes
10
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic Gray Transmission Distance: 2.5 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA BambuLab Basic White Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Gray At layer #14 (1.2mm) swap to BambuLab Green At layer #22 (1.84mm) swap to White for the rest.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
