Green Day Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:PLA Generic Recicled Negro Transmission Distance: 0.6PLA Generic Recicled Rojo Transmission Distance: 4PLA Generic Recicled White Transmission Distance: 5This print uses 3 unique filaments Swap Instructions:Start with NegroAt layer #8 (0.72mm) swap to RojoAt layer #12 (1.04mm) swap to White for the rest.