Green Dragon bookmarker

This is one of my first attempts at creating a bookmarker this is done in Hueforge so please follow the instructions below: Project: GreenDragonbookmarker.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.33x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm PLA+ Sunlu Black Transmission Distance: 0.3 PLA+ Sunlu Green Transmission Distance: 10 PLA+ Sunlu Yellow Transmission Distance: 10 PLA+ Sunlu White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Green At layer #13 (1.12mm) swap to Yellow At layer #19 (1.6mm) swap to White for the rest. If you have any question please ask and please let me know if you have any issues or suggetions for this model.