Green Dragon (hueforge)

Project: Dragon.hfpPrint at 100% infill with a layer height of 0.05mm with a base layer of 0.05mmThe Model is 100.03x178.58mm in sizeYou may print at higher layer heights below the Min Depth of 0.45mmThe Max Depth is 2.3mm and the Actual Depth is 2mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #14 (0.7mm) swap to Blue Gray At layer #22 (1.1mm) swap to BambuLab Green At layer #30 (1.5mm) swap to White for the rest.