Green Lantern and Sinestro

Project: Green Lantern and Synestro.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 158x240mm in sizeYou may print at higher layer heights below the Min Depth of 0.8mmThe Max Depth is 2.9mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA PolyLite Grey Transmission Distance: 1 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #15 (1.28mm) swap to Grey At layer #21 (1.76mm) swap to Jade White for the rest.