Thingiverse
Green Lantern Corp Ring Set Display Base
par nschwerin
82
Téléchargements
66
Likes
0
Makes
I included 2 versions of the file. one for larger printers and scaled to fit size 11 and higher rings and one sized for 10 and below and designed to fit on an Ender 3.
The under section that mounts the Black Lantern ring can be hard to print supports for, but I found some settings that removed with no issues at all. I have kept these for use in all my prints with hard to remove support areas. Settings under MISC notes.
I would suggest using 4 walls on the pegs that mount the rings if you have this stand in an area that might be bumped or knocked as the length can be a bit of a sturdiness issue. if it is only going on a shelf or out of reach, 3 walls will be more than enough.
The under section that mounts the Black Lantern ring can be hard to print supports for, but I found some settings that removed with no issues at all. I have kept these for use in all my prints with hard to remove support areas. Settings under MISC notes.
I would suggest using 4 walls on the pegs that mount the rings if you have this stand in an area that might be bumped or knocked as the length can be a bit of a sturdiness issue. if it is only going on a shelf or out of reach, 3 walls will be more than enough.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
