greenandorangecyberalien

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.32mmThe Max Depth is 2.1mm and the Actual Depth is 2.1mmFilaments Used: PLA BambuLab Basic Brown Transmission Distance: 2 PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Yellow Transmission Distance: 10 PLA+ Esun Pink Transmission Distance: 5 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu Red Transmission Distance: 6 PLA PolyLite Natural Transmission Distance: 21 PLA+ Esun Space Blue Transmission Distance: 3.5 PLA Default White Transmission Distance: 5This print uses 9 unique filamentsSwap Instructions: Start with Brown At layer #7 (0.72mm) swap to Black At layer #8 (0.8mm) swap to Yellow At layer #16 (1.44mm) swap to Pink At layer #18 (1.6mm) swap to Grey At layer #19 (1.68mm) swap to Red At layer #20 (1.76mm) swap to Natural At layer #22 (1.92mm) swap to Space Blue At layer #23 (2mm) swap to White for th