Grian Chatten

I got asked to create a Hueforge of Fontaines DC lead singer Grian Chatten on stage. Picture provided is a bit blurry but the Hueforge came out ok. Project: grian chatten hueforge 200x150.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x150.4mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.3mm and the Actual Depth is 2.4mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #18 (1.52mm) swap to Jade White for the rest. Overture Red works well as a substitute for BambuLab Basic Red Overture Red Transmission Distance: 4.8