Gridfinity Bin for 7 Wera Micro Screwdrivers

After completing my first A1 Mini repair (replacing the Hotend Heating Assembly due to a broken hinge) I decided I wanted to get some new hex keys as the included ones were already showing some wear. I purchased a 7 piece set (Wera - Micro Screwdriver Set 7Pc (Hex) Metric) that included the 1.5mm and 2.0mm that I need for my printer. I found a few Gridfinity bins for Wera Micro, but none held 7 of them so I decided to try making my first Gridfinity bin. I ended up with this 2 x 5 x 4u bin. Since it is too large for my A1 Mini, I cut it with BambuStudio using a dovetail joint. This is the first time I have cut a model to print it, but it worked well and is holding together tightly so I don't plan on gluing it together. I used the rounded end of my XL scraper to help push the parts together as it was hard to get my fingers between the screwdriver supports. I didn't get a picture of it before putting it together, but here is the first picture after assembly and a picture of it in