Gridfinity for String Pluckery Fret Wire Bender

Gridfinity holder for the String Pluckery Guitar Fret Wire Bender and Straightener. This is for their “improved version” available here: https://stringpluckery.com/product/guitar-fret-wire-bender-and-straightener/ Please note, this is ONLY a gridfinity bin sized to fit the tool, not the tool itself. The bin is sized to fit the bearing on the back of the tool when the height/radius adjustment is in the fully closed position. The bin has been mostly hollowed out other than the area holding these bearings and can be used for storing other tools. The fret wire bender overlaps the bin and therefore sits up above on top. I sized it such that the overlap is on the top and sides, but not on the bottom. My hope was to minimize the number of spaces required on the grid, though it will require the bins beside these 3 overlap sides to be a Z height of 4 units or less. Model Details:Dimensions (gridfinity units) - 2X x 4Y x 4ZStackable? - NoMulticolor? - Yes: 3mm lip on top edge. However this is no