Gridfinity - Phomemo D30 Storage Bin/Holder/Mount

Do you find yourself digging through piles of electronics, PCBs, and various bits and pieces in your drawers or storage containers? Let's put an end to the clutter with Gridfinity! Check out my newest addition: A 1x4x9 storage bin for the Phomemo D30 label printer. When roughly placed correctly, the inlay is optimized to let the D30 slide into the correct position. The bin is a bit lower than the label printer, so you can quickly grab it when needed. When The model supports friction-mounted 6x2mm magnets for an angeled mount. IMPORTANT: Not all Phomemo D30 label printers are the same size. Please select the corresponding print profile or model. If you have another size that is not yet supported, please message me, and I will provide an updated model.My preferred printer settings:Material: Bambu PLA (Tough) on a Textured PEI PlatePresets: 0.20mm StandardWalls: 3Infill: 13% Gyroid patternYou can tweak the wall thickness and infill to use less material, but these settings gave me the