Thingiverse
Gridfinity Phone Stand
von hoco
12
Downloads
5
Likes
0
Makes
This 1x2x6 module holds a phone and directs all the sound from its speakers forward toward you, for improved volume. I don't think it could possibly improve the sound other than making it louder.
The model itself has no internal supports for the upper shelf. I painted support enforces on the underside of the shelf and used organic supports. The Slicer wanted them to be placed on the print bed so I reduced the “Maximum Branch Angle” and the “Preferred Branch Angle” to 20º which forced the supports to be inside. It is very important not to use auto-generated supports.
The example in the photos was printed with Eryone Tricolor RGB PLA filament.
Based on the Gridfinity System from Zack Freedman: https://thangs.com/designer/ZackFreedman
https://www.youtube.com/c/ZackFreedman
License: CC BY-NC-SA 4.0 https://creativecommons.org/licenses/by-nc-sa/4.0/
#gridfinity
The model itself has no internal supports for the upper shelf. I painted support enforces on the underside of the shelf and used organic supports. The Slicer wanted them to be placed on the print bed so I reduced the “Maximum Branch Angle” and the “Preferred Branch Angle” to 20º which forced the supports to be inside. It is very important not to use auto-generated supports.
The example in the photos was printed with Eryone Tricolor RGB PLA filament.
Based on the Gridfinity System from Zack Freedman: https://thangs.com/designer/ZackFreedman
https://www.youtube.com/c/ZackFreedman
License: CC BY-NC-SA 4.0 https://creativecommons.org/licenses/by-nc-sa/4.0/
#gridfinity
hoco veröffentlicht auch auf
121 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
